Filter
Top Products
Transferring (Dubbing)
57
VQT0R73
When connecting to the IN2/DV input terminals on the front of
the unit
≥You can also connect to the IN1 input terminals on the rear of the
unit.
Before connecting any cables, first make sure that the power for
the unit and the external device are off. Then, after connecting
cables, turn on both.
If the audio output of the other equipment is monaural
Connect to L/MONO. (Both left and right channels are recorded
when connected through L/MONO.)
≥The S-VIDEO terminal achieves a more vivid picture than the
VIDEO terminal.
When recording from the unit’s DV input terminal (l 27)
≥The audio recorded through the DV input terminal is the audio
selected in the “Select Audio Channel For DV Input” (l 42).
≥When recording from DV equipment (e.g., digital video camcorder),
you can record audio/video recordings from DV tape only.
≥The DV input on this unit is for use with DV equipment only.
Preparation
≥Connect an external device to this unit’s input terminals
(l above).
DVD [RAM] [-R] [-RW‹V›] [+R]
≥Release protection (disc l 30, cartridge l 30). [RAM]
≥Press [DVD].
VHS
≥Insert a video cassette with an accidental erasure prevention tab.
(l 46)
≥Press [VHS].
[1] Press [REC MODE] to select the recording
mode.
(DVD l 24, VHS l 49)
≥DVD [RAM] [-R] [-RW‹V›] [+R]
- It is also possible to perform Flexible Recording (FR). (l 25)
[2] While stopped
Press [CH, W, X] or [INPUT SELECT] to select
the input channel for the equipment you have
connected.
≥Select IN1, IN2 or DV.
≥For VHS, the “DV” channel can be selected however it cannot
be recorded.
Follow the above steps 1 to 2.
[3] Start play on the external device.
[4] Press [¥, REC] at the point where you want to
start recording.
Follow the above steps 1 to 2.
[3] Press [1, PLAY].
≥Start playing the video cassette and find the recording start
point.
[4] Press [;, PAUSE], then press [¥, REC].
≥Put the unit in recording standby mode.
[5] Start play on the external device.
[6] Press [;, PAUSE] at the point where you want
to start recording.
∫To skip unwanted parts
Press [;, PAUSE] to pause recording. (Press again to restart recording.)
∫To stop recording
Press [∫, STOP].
Note
≥When recording using the unit’s input terminals, only the sound received at the time of recording will be recorded. As long as secondary
audio that is recorded on the media in the external device is not output to the unit in play, it is not recorded.
≥When recording using IN1 or IN2 terminals, only the sound received at the time of recording will be recorded.
For your reference
≥Almost all videos and DVD software on sale have been treated to prevent illegal copying. Such software cannot be recorded.
Recording from an external device
EJECT
POWER
S VIDEO IN
VIDEO IN
SKIP
REW/FF
–
AUDIO IN
–
RL/MONO
IN2
DVD
VHS
–
–
:/65/9
VHS DVD
VHS DVD
CH REC
OPERATION
SELECT
DUBBING
/k1.3
DV IN
DV IN
(2)
(1)
(3)
(4)
(1) Audio/Video cable (not supplied)
A Yellow (VIDEO)
B White (L)
C Red (R)
(2) S-Video cable (not supplied)
(3) DV cable (IEEE1394, 4-pin)
(4) External device (Playback equipment)
∫ Manual recording
1 DVD 1 VHS
VHSDVD
Transferring
(Dubbing)
ES40VP&PC.book 57 ページ ２００５年９月６日 火曜日 午前１０時２３分