Filter
Top Products
Getting started
VQT4C71
13
Connection
• Before connection, turn off all equipment and read the appropriate operating instructions.
If the TV does not have the HDMI terminal
Connect the TV with the Audio/Video cable. (> 14)
About HDMI cable
• Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
• When outputting 1080p signal, please use HDMI Cables 5.0 meters or less.
• Recommended Panasonic HDMI cable part number:
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m), RP-CDHS50 (5.0 m), etc.
• The HDMI connection supports VIERA Link “HDAVI Control” (> 62).
• You cannot connect this unit to DVI devices that are incompatible with HDCP.
Depending on the device, images may not display properly or at all when connecting with a DVI/HDMI switching cable. (Audio
cannot be output.)
• If you are connecting to a TV that is only compatible with 2 channel audio output, audio with 3 channels or more will be down
mixed and output as 2 channels, even if connecting with an HDMI cable. (Some discs cannot be down mixed.)
Basic connections
When the unit is not to be used for a long time
To save power, unplug it from the household mains socket. This unit consumes a small amount of
power, even when the unit is in standby mode.
[approx. 1.1 W (“Power Save in Standby” is activated)]
VHF/UHF
RF IN
HDMI IN
To the aerial
TV’s rear panel
Aerial cable
RF coaxial cable
(supplied)
This unit’s rear panel
Cooling fan
HDMI cable
AC mains lead
(supplied)
• Connect only after all other
connections are complete.
Household mains socket
(AC 220 to 240 V, 50 Hz)
DMRXW390GL-VQT4C71_eng.book 13 ページ ２０１２年２月２７日 月曜日 午前９時２０分