Panasonic DVD-S97 DVD Player User Manual


 
RQT7584
7
Select “Off” in “HDMI Audio Output” (page 17, “HDMI” tab).
Turn on the television and select the appropriate video input on the television.
To change these settings later
Select “QUICK SETUP” ( page 17, “Others” tab).
Manufacturer and Code No.
Test by turning on the television and changing channels. Repeat the procedure until you find the code that allows correct operation.
If your television brand is not listed or if the code listed for your television does not allow control of your television, this remote control is not compatible
with your television.
Enjoying multi-channel surround sound
STEP 2
The remote control
Batteries
Insert so the poles (i and j) match those in the
remote control.
Do not use rechargeable type batteries.
Do not:
mix old and new batteries.
use different types at the same time.
heat or expose to flame.
take apart or short circuit.
attempt to recharge alkaline or manganese batteries.
use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte
leakage which can damage items the fluid contacts
and may cause a fire.
Remove if the remote control is not going to be used
for a long period of time. Store in a cool, dark place.
Use
Aim at the remote control signal sensor ( page 8),
avoiding obstacles, at a maximum range of 7 m (23
feet) directly in front of the unit.
STEP 3
QUICK SETUP
123 4 5
Power ON.
Shows QUICK
SETUP
screen.
Follow the
message and
make the settings.
Press to finish
QUICK
SETUP.
Press to
exit.
OPTICAL
COAXIAL
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
CENTER
SUBWOOFER
5
.
COAXIAL IN
CENTER SUBWOOFER
SURROUND
(L) (R)
FRONT
(L) (R)
COAXIAL IN
OPTICAL IN
AUDIO OUT
5. 1c h
L
R
CENTER
SURROUND
FRONT L/L
SUBWOOFER
FRONT R/R
L
R
2
c
2
2
h
OPTICAL
Coaxial
cable
Audio cable
Connect cables to
terminals corresponding to
the speakers you have
connected.
Change “Speaker
Settings” ( page 16,
“Audio” tab).
WITH AUDIO IN 5.1ch
Change “PCM Digital Output”,
“Dolby Digital”, “DTS Digital
Surround”
( page 16,“Audio” tab ).
To obtain maximum performance of DVD-Audio multi-channel linear PCM
sound, this connection is recommended.To enjoy digital multi-channel
surround sound, connect to an amplifier with HDMI terminals. (
page 6)
Amplifier with a built-in decoder or
a decoder-amplifier combination
You cannot use DTS Digital Surround
decoders not suited to DVD.
Even if using this connection, output will be
only 2 channels when playing DVD-Audio.
To enjoy multi-channel surround sound,
connect with 5.1 ch AUDIO OUT terminals
(
right) or HDMI terminals (page 6)
Optical digital audio cable
Do not bend sharply when connecting.
WITH COAXIAL IN or OPTICAL IN
Amplifier
Back of the unit
R6/LR6, AA, UM-3
DIRECT NAVIGATOR
TOP MENU
PLAY LIST
MENU
ENTER
DISPLAY
RETURN
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
SUBTITLE
AUDIO
ANGLE/PAGE
SETUP
FL SELECT
TV
TV/VIDEO
CH
VOLUME
DVD
SETUP
ENTER
RETURN
ENTER
SETUP
STEP 4
Television operation (You can use this unit’s remote control to operate your television.)
Point the remote control at the television
While pressing [Í TV], enter the code with the numbered buttons.
e.g., 01: [0] [1]
TV
TV/VIDEO
CH
VOLUME
TV operation
Panasonic
National
QUASAR
01, 02
HITACHI 12 RCA 05 THOMSON 05
JVC 11 SAMSUNG 14, 18, 19 TOSHIBA 09
LG 15, 16, 17 SANYO 10 ZENITH 04
FISHER 10 MAGNAVOX 03 SHARP 06, 07
GE 05 MITSUBISHI 13 SONY 08
GOLDSTAR 15, 16, 17 PHILIPS (RC-5) 03 SYLVANIA 03
7