Panasonic NV-VP30EBL DVD VCR Combo User Manual


 
External recording control
!
Press the button to activate the VCR's recording standby mode.
As long as the Video- or Controlsignal is being transmitted by the Satellite or
Digital Receiver, the VCR will record.
EXT LINK
The following screen will be shown
if you selected EXT LINK 2:
- Be sure that the timer programmes stored by your VCR do not overlap the
ones of the satellite or digital receiver.
- Some external equipment may not work with this function, refer to the
operating instructions for the external unit.
!
!
Press to hide the message.
Press the button to stop recording.
ENTER
EXT LINK
ENTER : yes EXT LINK :cancel
EXT LINK recording in progress.
The AV2 input of this VCR/DVD is equipped for future use with external
equipment having external timer recording control such as digital satellite
receivers. The AV2 input can be set to EXT LINK 1 or EXT LINK 2 depending
on the equipment to be connected. Fully wired 21-pin scart cable is required.
Refer also to the manufacturer’s instruction for the external unit.
The VCR recording start and stop time is controlled by a control
signal sent via the 21-pin scart cable from the external unit, for
example Sky Digibox.
The VCR will start recording when AV2 input detects the video
signal and stop recording when the video signal is switched off by
the external unit.
EXT LINK 1:
EXT LINK 2:
External recording control
!
!
!
!
Press and select Others
Press
Select EXTLINK 2 or 1
Press to return to the Menu screen.
MENU
ENTER
MENU
Notes:
DVD
TV
VCR
EXT LINK
23
Others
Tape length
Remote : VCR 1
EXT LINK : 2
: AUTO( E-240)
AV2 : DECODER
SQPB : AUTO
OSD : 4:3
VCR/DVD OUTPUT : AUTO
: select
: return : exit
MENU
EXIT
RF IN
RF OUT
AV 1
AV 2
VCR / DVD
Receiver
Aerial
21-pin scart cable
VCR DVD
TV