Panasonic TZ-PCD2000 TV Cables User Manual


 
19
Programming the Remote Control
Programming for volume control
The volume adjustment function can be locked so that regardless of whether CBL, TV
or VCR mode is active, the volume is adjusted for only one of the modes. (Refer to
the
table below.)
The default setting is TV. When the setting is AUX mode, you can adjust the volume
for the AUX component at all times, even if some other mode is currently active.
Setting method
1.Press the Setup button and hold for 3 seconds (until the visible LED blinks twice).
2.Use the numeric buttons on the remote control to enter “993”. After this number is
entered, the LED on the remote control will flash twice.
3.Press the button for the mode that you would like to lock the volume adjustment for.
When the setting is complete, the LED on the remote control will flash twice.
Canceling the setting
1.Press the Setup button and hold for 3 seconds (until the visible LED blinks twice).
2.Use the numeric buttons on the remote control to enter “993”. After this number is
entered, the LED on the remote control will flash twice.
3.Press the VOL + button. When the setting is canceled, the LED on the remote
control will flash four times.
Note:
In the case of Mode Reassignment, the operation will be as shown in the table
below. See below for details on Mode Reassignment.
Mode Reassignment
You can assign the Code for setting a certain mode (TV, VCR or AUX) to use as the
Code for setting some other mode.
(Example) Assigning the button setting Code for TV mode to the button for VCR mode
1.Press the Setup button and hold for 3 seconds (until the visible LED blinks twice).
2.Use the numeric buttons on the remote control to enter “992”. After this number is
entered, the LED on the remote control will flash twice.
3.Press the TV button.
4.Press the VCR button. When the setting is complete, the LED on the remote control
will flash twice. Then you can use second TV (which has other Remote Code)
instead of VCR.
Note:
The Code for CBL mode cannot be assigned to any other mode. Furthermore, no
other Code can be assigned to CBL mode.
Volume
Locked to:
TV
VCR
CBL
AUX
TV
TV TV TV
VCR
VCR VCR VCR AUX
AUX
AUX
AUX
AUXAUXAUXAUX
CBL CBL CBL
CBL
Physical Mode Keys
Volume
Locked to:
TV
VCR
CBL
AUX
TV
TV TV2 TV
VCR
TV2 TV2 TV2 AUX
AUX
AUX
AUX
AUXAUXTV2AUX
CBL TV2 CBL
CBL
Physical Mode Keys
TV2
Mode Reassigned to:
VCR button
AUX button
LED
TV button
Setup button
Numeric buttons
CBL button
VOL + button