Filter
Top Products
35
Basic Operation
The following are possible broadcast types with their accompanying on-screen displays. The signal being
received is indicated with a “ ” mark while the selected audio mode is indicated with an arrow. To change the
audio mode for these broadcasts, follow the “Select Audio Mode for TV Viewing” section (below.)
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo (main language) and Secondary
Audio Program (sub language) broadcasts are both being received
simultaneously.
Select the STEREO or SAP audio mode.
MTS Stereo broadcast
Multi-channel Television Sound Stereo broadcast. Select STEREO
audio mode.
• If stereo broadcast is weak and the display flickers, select MONO
audio mode for possibly better results.
SAP broadcast
Secondary Audio Program (sub language.)
Select SAP audio mode for the sub language.
MONO broadcast
Normal monaural sound broadcast.
Receivable Broadcast Types
Press SAP button to select the desired audio mode as described below.
(Arrow shows selection.)
• Each press of SAP button will change the audio mode as shown below.
• “SAP” is selected with first press of SAP button.
Select Audio Mode for TV Viewing
Mute / Freeze / SAP
< Example >
Press
SAP
Press
SAP
Press
SAP