Panasonic PT 40LC12 Projection Television User Manual


 
61
Information
Remote Control Quick Reference Guide (Operating peripheral equipment)
Programming The Illuminated Remote Control Using Access Codes
The remote control can be preset for other manufacturers, by utilizing the REMOTE MODE SELECTION BUTTONS for
CABLE, DTV, VCR, RCVR (a Receiver or Amplifier), DVD (DVD or CD) ,DBS and AUX (for Cassette Player or a
PVR.) Details on remote control buttons to operate peripheral equipment. (PP. 66, 67)
1 Setting up the remote using the numerical keys.
(When code is known):
1
Press and hold the POWER and ACTION
buttons simultaneously for at least 5 seconds.
After 5 seconds, all the illuminated mode
buttons will begin to flash. Then let go of the
POWER and ACTION buttons.
2
3
Press the desired mode button.
The mode button will illuminate steadily, all
others will go out.
Enter the three digit set up code, by using the
Remote Control Keyboard.
If the correct code is entered, the mode button will
blink twice and then go out.
Now your remote is set for this code.
Then, press the Remote Control POWER button to
test the component. If the procedure was
successful, the component will turn on.
Notes:
Due to changes in infra-red commands used by manufacturers, some brands have several codes. If your unit
does not respond to the first code, please try the next one.
If an incorrect number is entered (or there is an incomplete entry after 30 seconds), the button illumination goes out
(no blink) and settings are unchanged.
Repeat setup after remote battery replacement.
Remote will not control every component made by the manufacturer listed.
If you get no response, your particular component cannot be controlled. There are NO additional codes for the
products listed. If your product is not listed, then the remote is not compatible with that product.
Device
TV
VCR
CBL
DBS
RCVR
AUX
DVD
DTV
Operate
TV (Only Panasonic)
VCR (Preset)
Cable Boxes (Preset)
DBS Boxes (Preset)
RCVR (Preset)
Cassette Players, PVR (Preset)
DVD & LD & CD Player (Preset)
STB (Only Panasonic)
Default
Panasonic Code
Panasonic Code
Panasonic Cassette Players Code
Panasonic DVD Code
Panasonic Code
Panasonic Code
Panasonic Code
Panasonic Code
+