Filter
Top Products
60
For assistance, please call : 1-888-VIEW PTV(843-9788)
Replacing the lamp unit
The lamp unit is sold separately. To purchase a replacement, call the Panasonic accessory department, toll
free at: 1-800-332-5368.
Lamp unit Part No. : TY-LA1500
Lamp unit replacement period
• When the stipulated time is reached, “THE LAMP NEEDS TO BE REPLACED,•••” will
be displayed for about 5 minutes.
• The LAMP indicator lights red.
Important Points to keep in mind
When replacing the lamp unit with a new one, pay attention to the following points.
Warning:
• Because the temperature of the lamp unit is elevated immediately after its use, directly touching it may cause
burns. Please allow the lamp to cool before handling or replacing the lamp unit.
Cautions for Lamp Unit Replacement:
• Handle the removed old lamp unit carefully. If handled improperly, it may have a risk of explosion.
• Wear gloves when replacing the lamp unit.
• If replacing the lamp unit becomes necessary during the operation of the TV, follow the procedure below to turn off
the power and wait until the lamp unit cools completely.
3. After the cooling fan has stopped, Unplug the power cord from the outlet.
1. Press the POWER button on the remote control unit to turn off the power.
2. Wait for about 1 minute until the cooling fan stops.
• The lamp cooling fan will continue to operate for about 1 minute after turning off the power. Do not
unplug the power cord from the outlet until the fan has stopped. Avoid interrupting the power line by
using circuit breakers or switchable power strips.
Due to the characteristics and use conditions of individual lamps, the lamp may cease to light before the stated
lamp life.
Influences of frequent lighting, continuous light use for over 24 hours, the number of times lit, the length of time
between lightings, etc. may shorten lamp life.
(Because of this, we recommend having a replacement lamp on hand.)
WARNING:
The high-pressure lamp could explode if not properly handled and lamp fragments could cause injury.
Refer to the instructions enclosed with the lamp unit (Part No.: TY-LA1500)
when replacing the lamp.
• Please wait more than one hour for lamp replacement.
[ If you need to replace the lamp more urgently ]
• The Projection display has a forced cooling feature. After the POWER button is turned OFF, and sometime
during about the first minute of the normal cooling fan operation, press the VOL+ button on the Projection
display and the button on the Remote control at same time for more than 5 seconds. The cooling fan operates
for about 10 minutes.
The lamp has a maximum life of about 5 000 hours.