Filter
Top Products
16
Tuning TV
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Please make all cable or antenna connections before powering on.
Plug the unit power cord into an AC wall outlet.
Settings are made automatically. When
complete, this screen appears.
If setup is incomplete, the following
screen appears. Check connection of
Antenna/Cable to the RF in Terminal,
then try to manually set the clock as
follows.
a. Press ACTION on the Remote Control to display
SET CLOCK Menu screen.
b. Press Ÿź to select the month and press SET to
set. In the same manner, select and set the date,
year, time, and DST (Daylight Saving Time).
• Press Ż repeatedly to move the cursor. Press Ÿź to make a
correction.
c. Press RETURN twice to start CLOCK and exit.
POWER
CH AUTO SET PROCEEDING
AUTO CLOCK SET
PROCEEDING
CANCEL:STOP
10/25/2004 MON 11:45AM
DST:ON
SETTING : CH 10
AUTO CLOCK SET
COMPLETED
AUTO CLOCK SET
IS INCOMPLETE
PLEASE SET CLOCK BY
PRESSING ACTION KEY
Case 1
Case 2
Initial Setup (Ready to Play)
• Function buttons are void during Initial Setup.
• To eject a tape during Auto Set, press the unit STOP/EJECT button twice.
Then, make settings manually. (See pages 17-18.)
• If Auto Clock Set takes more than 30 minutes, press STOP and perform
settings manually. (See pages 17-18.)
EJECT
STOP
POWER
STOP/EJECT
1 Press POWER on the Remote Control or unit. Auto
channel and clock set starts.
• If you use a cable box, turn it on and set it to the Public Broadcasting
Service (PBS) channel in your time zone. If you use a DSS receiver,
it must be turned off.
5 Press Ÿź to select “AUTO SET,” then press SET.
Note:
• After Channel Auto Set is finished, Clock Auto Set will be performed. (If
clock is set manually, Clock Auto Set will not be performed.)
2 Press ŸźŻŹ to select “CH.”
3 Press SET to display SET UP CHANNEL screen.
1 Press ACTION to display MAIN MENU.
Automatic Channel Setting
4 Press Ÿź to select “ANTENNA,” then press SET to
set your antenna system (“TV” or “CABLE”).
SET CLOCK
1/ 1/2004 THU 12:00PM
DST:ON
SELECT: SET:SET
START :RETURN
SET CLOCK
10/25/2004 MON 11:45AM
DST:ON
SELECT: SET:SET
START :RETURN
MAIN MENU
DVD LOCK LANGUAGE
TV CLOCK CH
SELECT: SET:SET
END :RETURN
SET UP CHANNEL
ANTENNA : CABLE
AUTO SET
WEAK SIGNAL DISPLAY:OFF
SELECT: SET:SET
END :RETURN
ACTION
SELECT
ŸźŻŹ/
SET
RETURN
ADD /
DLT
NUMBER
Keys
CH Ÿź
FF PLAY / REPEAT