Filter
Top Products
31
VCR
Operation
P DT START STOP CH SPD
1 10 9:00a12:00p 08 SP
2day 11:00a11:30a125 SP
3 12 8:00p 9:30p L1 EP
4 -- --:-- --:-- -- --
CANCEL:ADD/DLT
SELECT: SET:SET
EXIT :RETURN
P DT START STOP CH SPD
1 -- --:-- --:-- -- --
2day 11:00a11:30a125 SP
3 12 8:00p 9:30p L1 EP
4 -- --:-- --:-- -- --
SELECT: SET:SET
END :RETURN
1 Hold down STOP for a few seconds to cancel the
Timer Recording.
• Any future daily or weekly recordings will be performed as
programmed.
Cancel a Timer Re cording:
(Recording is in progress)
5 Press RETURN to exit this mode.
To Replace program...
a. Press SET to display.
b. Press Ÿź to select and press SET or ŻŹ to set new
program contents.
c. Press RETURN.
To Clear program...
Press ADD/DLT.
4 Press Ÿź to select the desired program.
Notes:
• 2 minutes before Timer recording is performed, “PLEASE PREPARE FOR
VCR TIMER REC” appears. Be sure a cassette with record tab is loaded
and the unit is in Stop mode.
• If the start times of two programs overlap, the lower numbered program
will have priority.
• If the start time for a Timer Recording comes up during a normal recording
or One Touch Recording (page 29), the Timer Recording will not be
performed.
• If there is a power interruption of more than one minute, the recording may
not be performed or continued.
• If “INCOMPLETE” appears after all items have been set, check all entries
and make necessary corrections.
1 Press PROG/CHECK to display SET TIMER
PROGRAM screen.
2 Press ŻŹ to select “VCR.”
3 Press SET to display screen.
Review, Replace or
Clear Program Con tents :
(Recording is not in progress)
P DT START STOP CH SPD
1 10 9:00a12:00p 08 SP
2day 11:00a11:30a125 SP
3 12 8:00p 9:30p L1 EP
4 -- --:-- --:-- -- --
CANCEL:ADD/DLT
SELECT: SET:SET
END :RETURN
SET TIMER PROGRAM
SELECT: SET:SET
END :RETURN
DVD VCR