Panasonic PV DR2714 DVD VCR Combo User Manual


 
34
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Insert a tape in Power off mode.
Power turns on, ĺ Play.
Note:
Playback begins if tape has no record tab.
Tape reaches its end
Rewind, ĺ Stop.
Tape with no record tab reaches its end
Rewind, ĺ Stop, ĺ Eject.
(except for Recording)
(Repeat Play must be “OFF”)
Auto Playback
Auto Rewind
Playback Auto Eject
Continuously analyzes the signal and adjusts for optimum picture
quality.
Use during Playback and Slow Motion mode to reduce picture
noise. Press CH Ÿź on the Remote Control or the unit until the
picture clears up. To return to Auto Tracking, press POWER off,
then on again a few seconds later.
In Still mode, CH Ÿź operate as a V-Lock control to reduce jitter.
Digital Auto Tracking
Manual Tracking Control
V-Lock Control
1 Press CM/ZERO repeatedly to select skip time in
Playback mode.
By pressing CM/ZERO in Playback mode you can skip over 1, 2,
or 3 minutes of recorded tape as desired.
Note:
No indication appears.
Commercial Skip
1st Press
1 min skip
OFF
2nd Press
2 min skip
3rd Press
3 min skip