Filter
Top Products
[PROJECTOR SETUP] menu
ENGLISH - 113
Settings
■
To change the lens memory name
4) Select [LENS MEMORY EDIT] in Step
3).
5) Press the <ENTER> button.
z
The [LENS MEMORY EDIT] screen is
displayed.
6) Press
to select [LENS MEMORY
NAME CHANGE].
7) Press the <ENTER> button.
z
The [LENS MEMORY NAME CHANGE] screen
is displayed.
8) Press
to select the name to
change, and press the <ENTER>
button.
z
Lens memory name screens are displayed.
9) Press
to select the text, and
press the <ENTER> button to enter the
text.
10)
After the name is changed, press
to select [OK], and press
<ENTER>.
z
The registration completes and returns to the
[LENS MEMORY NAME CHANGE] screen.
z
If you press
to select [CANCEL] and
then press the <ENTER> button, the changed
name will not be registered.
z
If you press
to select [DEFAULT] and
press the <ENTER> button, the changed name
will not be registered and the default name will
be used.
z
If you select [OK] without entering any
characters and press the <ENTER>button, the
default name will be used.
[SAVE ALL USER DATA]
Save the various setting values as a backup in the
built-in memory of the projector.
1) Press
to select [SAVE ALL USER
DATA].
2) Press the <ENTER> button.
z
The [SECURITY PASSWORD] screen is
displayed.
3) Enter a security password and press
the <ENTER> button.
4) When the conrmation is displayed,
select [OK] or [CANCEL], and press
the <ENTER> button.
z
[PROGRESS] is displayed on the screen while
the data is saved.
[LOAD ALL USER DATA]
Load the various setting values saved as a backup in
the built-in memory of the projector.
1) Press
to select [LOAD ALL USER
DATA].
2) Press the <ENTER> button.
z
The [SECURITY PASSWORD] screen is
displayed.
3) Enter a security password and press
the <ENTER> button.
4) When the conrmation is displayed,
select [OK] or [CANCEL], and press
the <ENTER> button.
Note
z
The projector will go into the standby status to
reect the setting values when [LOAD ALL USER
DATA] is executed.
z
Data set from the computer application is not
included in the [ALL USER DATA].