Filter
Top Products
[PICTURE] menu
ENGLISH - 71
Settings
■
When using <SDI IN 1> terminal,
<SDI IN 2> terminal (PT-DZ21KE
and PT-DS20KE only)
z
Single link
During SDI1 input, select [AUTO], [480i YC
B
C
R
], [576i
YC
B
C
R
], [720/50p YP
B
P
R
], [720/60p YP
B
P
R
], [1035/60i
YP
B
P
R
], [1080/24p YP
B
P
R
], [1080/24sF YP
B
P
R
],
[1080/25p YP
B
P
R
], [1080/30p YP
B
P
R
], [1080/50i
YP
B
P
R
], [1080/60i YP
B
P
R
], [1080/50p YP
B
P
R
],
[1080/60p YP
B
P
R
], [1080/24p RGB], [1080/24sF
RGB], [1080/25p RGB], [1080/30p RGB], [1080/50i
RGB], or [1080/60i RGB].
During SDI2 input, select [AUTO], [480i YC
B
C
R
], [576i
YC
B
C
R
], [720/50p YP
B
P
R
], [720/60p YP
B
P
R
], [1035/60i
YP
B
P
R
], [1080/24p YP
B
P
R
], [1080/24sF YP
B
P
R
],
[1080/25p YP
B
P
R
], [1080/30p YP
B
P
R
], [1080/50i
YP
B
P
R
], or [1080/60i YP
B
P
R
].
z
Dual link
Select [AUTO], [1080/24p RGB], [2K/24p RGB],
[2K/24p XYZ], [1080/24sF RGB], [2K/24sF RGB],
[2K/24sF XYZ], [1080/25p RGB], [1080/30p RGB],
[1080/50i RGB], or [1080/60i RGB].
Note
z
Refer to “List of compatible signals” (
page 167) for
compatible signals.
z
This may not function properly for some external
devices that are connected.
Making sRGB compliant
images
sRGB is color reproduction international standard
IEC61966-2-1, set by the IEC (International
Electrotechnical Commission).
Set according to the following steps to reproduce
more faithful, sRGB compliant colors.
1) Set [COLOR MATCHING] adjustment to
[OFF].
z
Refer to [COLOR MATCHING] (
page 88).
2) Display the [PICTURE] menu.
z
Refer to “[PICTURE] menu” (
page 65).
3) Press
to select [PICTURE MODE].
4) Press
to set [NATURAL].
5) Press
to select [COLOR].
6) Press the <DEFAULT> button on
the remote control to set the factory
default values.
7) Set [TINT], [COLOR TEMPERATURE],
and [GAMMA] to the factory default
values by following Steps 5) to 6).
Note
z
sRGB is supported only when RGB signals are
input.