Filter
Top Products
ENGLISH -
49
Settings
Custom adj.
Adjust the screen scale and position manually with
this function.
Press ▲▼ to select [Custom adj.].1 )
Press ► or the <ENTER> button to 2 )
enter the next submenu.
Press ▲▼ to choose the item you 3 )
want to adjust.
You can choose one from the items as below:
z
Scale H/V
Adjust the Horizontal/Vertical screen
scale.
H&V
When set to [On], the aspect ratio is
xed.
Position H/V
Adjust the Horizontal/Vertical screen
position.
Common
Save the adjusted scale or position
to all the inputs.
Reset Reset the all adjusted values.
Digital zoom +
Zoom in the images.
Press ▲▼ to select [Digital zoom +] 1 )
and then press the <ENTER> button.
The On-Screen Menu disappears and
z
[D. zoom +] appears.
Press the <ENTER> button to zoom in 2 )
the image size and
press ▲▼ ◄► to
move the image to the top/bottom/left/
right of the screen.
The Panning function can work only when the
z
image is larger than the screen size. A projected
image can be also expanded by pressing the
<D.ZOOM +> or the <ENTER> button.
Digital zoom -
Zoom out the images.
Press ▲▼ to select [Digital zoom -] 1 )
and then press the <ENTER> button.
The On-Screen Menu disappears and
z
[D. zoom - ] appears.
Press the <ENTER> button to zoom 2 )
out image size.
The projected image can be also compressed
z
by pressing the <D.ZOOM –> or the <ENTER>
button.
To exit the Digital zoom +/– mode, press any button
except the <D.ZOOM +/–>, <ENTER> and ▲▼◄►
buttons.
To return to the previous screen size, select a screen
size from the Screen Size Adjustment Menu or select
an input source from the Input Source Selection Menu
(
Æ
page 37) again, or adjust the screen size with the
<D.ZOOM +/–> buttons.
Note
When input computer signal to the projector, [Digital
z
zoom +/-] will be available.
[Digital zoom +/-] cannot be selected when [True] is
z
selected in the Screen aspect
.
[Digital zoom +/–] are disabled and cannot be displayed
z
when [480i], [576i], [480p], [576p], [720p], [1035i] or
[1080i] is selected in the PC System Menu
(
Æ
page 40
)
.
When [Digital zoom +/–] functions are disabled,
z
mark
will appear.
Keystone
This function is used to adjust keystone distortion of
the projected image.
Press ▲▼ to select [Keystone].1 )
Press ► or the <ENTER> button.2 )
Press ▲▼ to choose the item you 3 )
want to adjust.
Keystone To correct keystone distortion
Store
To store or reset the keystone
correction
Store
Keep the keystone correction
even when the AC power cord is
unplugged or turning off the projector.
Reset
Release the keystone correction
when the AC power cord is
unplugged.
Screen
The following items are the
submenus of [Store].