Filter
Top Products
Technical Information
76
- ENGLISH
Appendix
Mode
Display
resolution *
1
(dots)
Scanning
frequency
Dot clock
frequency
(MHz)
Picture
quality *
2
PnP Format
H (kHz) V (Hz)
D-WXGA
1360 x 768
47.700 60.00 86.67 A
H
56.160 72.000 100.19 A
1366 x 768
46.500 50.000 67.40 A
48.360 60.00 86.67 A
1376 x 768 48.360 60.00 86.67 A
1280 x 768
47.776 59.870 79.50 AA ○
60.289 74.893 102.25 AA
68.633 84.837 117.50 AA
1280 x 800
49.572 59.870 83.282 AA
41.200 50.000 68.557 AA
49.702 59.810 83.50 AA ○
63.980 60.020 108.00 AA
58.289 69.975 98.858 AA
60.044 71.995 102.795 AA
62.790 74.928 106.492 AA
71.553 84.879 122.498 AA
1280 x 768
55.993 69.991 94.964 AA
57.675 72.004 97.817 AA
D-SXGA 1280 x 1024
63.98 60.02 108.00 A ○
60.276 58.069 93.067 A
31.65 29.8 53.48 A
D-1035i 1920 x 1035i 33.75 60.00 74.25 A
D-1080i 1920 x 1080i
28.125 50.00 74.25 A ○
33.75 60.00 74.25 A ○
D-1080p 1920 x 1080
67.5 60.00 148.50 A ○
56.25 50.00 148.50 A ○
D-WXGA+ 1440 x 900 55.935 59.887 106.50 A
D-WSXGA+ 1680 x 1050 65.290 59.954 146.25 A
D-WUXGA 1920 x 1200 74.038 59.950 154.00 A
“i” added to the resolution value indicates an interlaced signal.*1 :
Picture quality is indicated by the following symbols.*2 :
AA: Maximum picture quality can be obtained.
A: Signals are converted by the image processing circuit.
Where marked "○" signals indicates in Plug and Play is compatible with EDID of projector. Unmarked signals *3 :
in Plug and Play may also be compliant if input terminals are written in the format list. Where Plug and Play
is unmarked and nothing is wirtten in the format list, difculties in projecting image may occur even when
computer and projector appear to have same resolution.
Note
The number of display dots is 1280 x 800.
z
A signal with a different resolution will be projected after converting the resolution to match the projector
display.
When interlaced signals are connected, icker may occur on the projected image.
z