Filter
Top Products
3D Y/C FILTER (NTSC)
ON
3D Y/C FILTER (NTSC)
COLOR SYSTEM
SIGNAL
ON
AUTO
3 : 2 PULLDOWN
OFF
[
VIDEO
]
36
SET UP for Input Signals
3D Y/C FILTER – For NTSC AV images
Select “SIGNAL” from the “SET UP” menu during VIDEO (S VIDEO) input signal mode.
(“SIGNAL [VIDEO]” menu is displayed.)
Note:
When ON, this setting only affects NTSC input signals.
Press to select the “3D Y/C FILTER (NTSC)”.
Press to set ON / OFF.
COLOR SYSTEM
Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input
signal mode.(“SIGNAL [VIDEO]” menu is displayed.)
Press to select the “COLOR SYSTEM”.
Press to select each function.
If the image becomes unstable:
With the system set on Auto, under conditions of low level
or noisy input signals the image may in rare cases become
unstable. Should this occur, set the system to match the format
of the input signal.
COLOR SYSTEM:
Set the color system to match the input signal. When “AUTO” is set, COLOR
SYSTEM will be automatically selected from NTSC/PAL/SECAM. However, M.NTSC
signal may not be displayed properly. To display M.NTSC signal, select “M.NTSC”
in COLOR SYSTEM.
AUTO SECAM M.NTSC
NTSCPAL