Filter
Top Products
Advanced
31
•
Tuning Programmes
Any new services found will be added to the Digital TV Service List.
Add New Digital TV Services
RF Ch Service Name Type Quality
Digital TV: 0
Searching
21
Scan 21 69
This will take about 3 minutes.
Radio: 0
•
The new service is added with the current settings
saved as they are.
Add Digital TV
programme
automatically
Add New
Digital TV
Services
Digital TV Auto Tuning
This will take about 3 minutes.
Scan 21 69
2
RF Ch Service Name Type Quality
ABC TV Sydney Digital TV 10
3 SBS DIGITAL 1 Digital TV 10
4 FTV guide Digital TV 10
7 7 Digital Digital TV 10
Digital TV: 4
Searching
Radio: 0
EXIT
RETURN
Start Auto Tuning
All digital TV tuning data will be erased
Digital TV Auto Tuning
Start Auto Tuning Settings are made automatically
•
All the previous tuning settings are erased.
•
When the operation is completed, the programme at programme position “1” will be displayed.
•
If tuning has not been done completely “Digital TV Manual Tuning”, “Analogue TV
Manual Tuning”
Automatically retune all Digital TV or Analogue TV programmes received in the area.
•
Only Digital TV programmes are retuned in Digital TV mode.
•
Only Analogue TV programmes are retuned in Analogue TV mode.
Set all
Digital TV or
Analogue TV
programmes
automatically
Digital TV
Auto Tuning or
Analogue TV
Auto Tuning
Digital TV Signal Condition
Service Name [CH53] 7 7 Digital
Signal Quality
Signal Strength
0
0
10
10
Selects a programme and checks the Digital TV Signal Condition.
•
To change the programme
CH
A good Signal Strength is not an indication of suitable
signal for Digital TV reception. Please use the Signal
Quality indicator as follows:
Signal Quality:
•
Green bar Good
•
Yellow bar Poor
•
Red bar Bad (Check the aerial)
Check
Digital TV
signal
Digital
TV Signal
Condition
Set
Digital TV
programme
manually
Digital TV
Manual
Tuning
Normally use “Auto Tuning” or “Add New Digital TV Services” to add Digital TV programmes
to your service list.
If tuning has not been done completely or for adjusting the direction of the aerial, use this
function.
select channel
search
Digital TV Manual Tuning
Analogue Scan 21 68
Physical Channel
Prog. Service Name Type New
Digital TV: 0
Signal Strength 0 10
Signal Quality 0 10
MHz
474.00[CH21]
Radio: 0
•
All services found will be added to the
Digital TV Service List.
adjust frequency (set where the level of
“Signal Quality” becomes the maximum)
Set
Analogue TV
programme
manually
Analogue TV
Manual Tuning
1 CH33
Analogue TV Manual Tuning
Manual Tuning 0
120
Set Analogue TV programme manually after Analogue TV Auto Tuning.
•
If a VCR is connected only with the RF cable, select programme position “0”.
store
search
Search and storeSelect the programme
CH
Select the programme position