Panasonic TH-42PZ850AZ Flat Panel Television User Manual


 
Menu Item Adjustments / Configurations (options)
Picture
Advanced
PC
Settings
W/B High R White balance of bright red area
and
repeatedly adjusted
W/B High B White balance of bright blue area
W/B Low R White balance of dark red area
W/B Low B White balance of dark blue area
Gamma (S Curve / 2.0 / 2.2 / 2.5)
Reset PC
Settings
Press the OK button to reset to the default Picture settings
Setup
PC
Setup
Input
Resolution
Switches to a wide view
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,366 × 768 pixels)
Options change depending on signals
Clock Set to the minimum level if noise occurs
H-pos
Adjusts horizontal position
V-pos
Adjusts vertical position
Clock Phase
Eliminates icker and distortion
Adjust after Clock adjustment
Set to the minimum level if noise occurs
Sync
PC sync signal type (H & V / SOG)
H & V : Horizontal and Vertical sync from your PC (Most common sync format)
SOG : Sync on Green sync from your PC
Reset PC
Settings
Press the OK button to reset to the default Setup settings
Other items p. 26 and p. 27
OPTION
SD CARD
EXIT
RETURN
INPUT
Input Selection
AV1
AV2
AV3
AV4
PC
HDMI1
HDMI2
HDMI3
TV
HDMI4
36
To return to TV
Displaying PC Screen on TV
Select the external input
Select “PC”
2
The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected.
To connect PC p. 44
Corresponding signals p. 48
If “H-freq.” or “V-freq.” is shown in red,
the signals may not be supported.
PC Audio input is via AV2 Audio
connection. (p. 45)
PC menu setting (changed as desired)
To make settings “How to Use Menu Functions” to (p. 24)
1
select
access