Filter
Top Products
62
Note: The signals listed below must be checked at connector HX1 of the HX-
Board.
Note: A possible malfunction of the HX-Board may
exist if any of the signals listed on this page is missing.
Verify that all DC inputs to the HX-Board are present. If
these are correct, replacement of the HX-Board is
recommended.
CN HX1, Pin B20
10us / div.20mV
Red Signal Input
CN HX1, Pin B18
10us_20mV
Green Signal Input
CN HX1, Pin B16
10us/ div, 20mV
Blue Signal Input
CN HX1, Pin B12
5ms/ div, 0.2V
Vertical Drive
CN HX1, Pin B14
10us/div, 0.2V
Horizontal Drive
CN HX1, Pin A4
5us/ div, 20mV
Serial Data
CN HX1, Pin B4
5ms/ div, 0.2V
Serial Clock