Filter
Top Products
82
CD mode
Select the CD mode from the front page of the CAT menu by pressing the
Up/Down button on the remote control, and then press the Mute button on the
remote control for more than 5 sec.
OSD
The software version of the EEPROM (IC9354) can be upgraded by:
1. Installing a new version IC
2. Loading the new version software from the loader tool, TZSC07036
Memory data change
Note: The data is memorized when the main power switch is pushed to the off
position.
To exit the CD mode, press the R button on the remote control.
MiCom Software version
Memory data version D
Memory data version H
Memory data change Address
Data
0.11
0.11 1
21.05
0 0
0 0
OK
8 63
78 3F
Factory
Use
New data
Original data
0 0
0 0
Address
Data
Change by pressing the
Up/Down
buttons on the remote control.
Change by pressing the Volume
Up/Down buttons on the remote
control.
Change by pressing the
Left/Right
buttons on the
remote control.
MiCom Software Version
Memory data
version D
Memory data version H
Memory data change Address
Data