Panasonic TX-51P800X Projection Television User Manual


 
18
Tuning Channels
The best tuning position is automatically memorized.
Automatic Tune
This TV uses automatic tuning to determine whether or not the TV can receive a broadcast signal which is being sent, and
automatically prepares so that the channel selection can respond to both the position select and direct select modes.
Before Automatic Tune, Channel Select and Regional System must already be set (Refer to pages 16).
SYS SELECT
CH SELECT
AUTO TUNE
MANUAL TUNE
FINE TUNE
SKIP
SOUND SYS
COLOUR SYS
AUTO
OFF
ACCESS
POSITION
5. 5 MHz
ASIA / M.EAST
AUTO TUNE
Press to select the AUTO TUNE.
Press to access to the AUTO TUNE.
Search Start.
1
When a station is found.
SOUND SYS
4.5MHz
6.5MHz
5.5MHz
6.0MHz
After all stations are tuned, the on-screen display will automatically change from AUTO TUNE
to SOUND SYS Position.
SYS SELECT
CH SELECT
AUTO TUNE
MANUAL TUNE
FINE TUNE
SKIP
SOUND SYS
COLOUR SYS
AUTO
OFF
POSITION
5. 5 MHz
ASIA / M.EAST
Note:
When the sound volume is too small to confirm, turn it up by using the sound volume button on the remote control.
2
Press to improve the Sound quality, if the Sound is not clear or no
sound is produced on a programme Number Position.
Press to exit from the Tuning Menu.
This returns the set to the normal viewing condition.
Press to store the Sound System.
STR
TV/AV
3
Under the normal viewing condition press to enter each programme Number.
Confirm the tuning condition.
If necessary, repeat step 2 for each Programme Number.
CH 29
29
SETUP : RETURN TO TUNING MENU
TV/AV
: TO EXIT
AUTO SETUP IN PROGRESS
SEARCHING
: PLESE WAIT
STORED CH29