Filter
Top Products
21
Tuning Channels
How to Cancel the Skip Function
Press to change the mode to “OFF”.
Press to select the SKIP.
1
2
STR
Press to store the Skip function.
Sound System Selection (Different region use differing systems)
This function is used only in the TV mode when the sound is not clear or no sound is produced on a Programme Number, and is not
applicable in AV mode .
Press to select the “SOUND SYS”.
1
Press until the optimum sound is obtained.
Note:
These are different sound broadcast transmission systems applicable to differing countries.
The sound system will change as shown.
4.5MHz
6.5MHz
5.5MHz
6.0MHz
SYS SELECT
CH SELECT
AUTO TUNE
MANUAL TUNE
FINE TUNE
SKIP
SOUND SYS
COLOUR SYS
AUTO
OFF
POSITION
5. 5 MHz
ASIA / M.EAST
Sound System
Condition.
2
Press to store the Sound System.
STR
TV/AV
Colour System Selection (Different region use differing systems)
If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, this function is used.
Colour System
Condition.
Note:
PAL, SECAM and NTSC 3.58 are different colour signal broadcast transmission systems applicable to differing countries. NTSC
4.43 is a trick playback mode used in special VCR to playback NTSC recorded video tapes through PAL television equipment.
2
SYS SELECT
CH SELECT
AUTO TUNE
MANUAL TUNE
FINE TUNE
SKIP
SOUND SYS
COLOUR SYS
AUTO
OFF
POSITION
5. 5 MHz
ASIA / M.EAST
AUTO PAL
NTSC3.58 NTSC4.43
SECAM
Press to store the Colour System.
STR
Press to select the “COLOUR SYS”.
1
Press to produce the optimum image.
The colour system will change as shown.
This returns the set to the normal viewing condition.
Press to exit from the “COLOUR SYS”.
TV/AV
This returns the set to the normal viewing condition.
Press to exit from the “SOUND SYS”.
SYS SELECT
CH SELECT
AUTO TUNE
MANUAL TUNE
FINE TUNE
SKIP
SOUND SYS
COLOUR SYS
AUTO
OFF
POSITION
5. 5 MHz
ASIA / M.EAST