Panasonic TX-51P800X Projection Television User Manual


 
20
SET UP
Fine Tuning
Under normal reception conditions this function is not required or necessary.
However, in areas of poor reception or constant interference, a slight adjustment of the tuning may improve the picture and sound quality
.
Tuning Channels
1
Press to select the FINE TUNE.
Press until the clear picture is received.
3
Press to exit from the FINE TUNE.
TV/AV
2
STR
Press to store the FINE TUNE.
This stores the FINE TUNE to the selected Programme Number.
This returns the set to the normal viewing condition.
Programme Number Skip
It is possible to skip Programme Number on which no TV stations
are tuned appearing on the screen. The function is only effective
when selecting Programme Numbers by pressing the Programme
Number Up or Down button either on the TV set or on the Remote
control
.
1
Under the normal viewing condition
press to select the Programme
Number you would like to skip.
How to Cancel the Fine Tuning
Canceling previously adjusted (manually) fine tuning, means
re-activating the AFT (Automatic Fine Tuning). Re-activating
the Automatic Fine Tuning means allowing the set to
automatically tune to the optimum tuning position, for that
programme Number.
1
Select the Programme Number
which you would like to return to
Automatic Fine Tuning (cancel the
manual fine tuning).
Press to display the SETUP MENU.
2
Proceed to the TUNING MENU
(refer to page 15).
Press to display the SETUP MENU.
SET UP
2
Proceed to the TUNING MENU
(refer to page 15).
This stores the re-activated AFT.
4
STR
Press to store the AFT.
5
Press to exit from the MANUAL TUNE.
TV/AV
This returns the set to the normal
viewing condition.
5
Repeat Step1 to 4 for each
Programme Number for which the
Skip function is desired.
1
3
24
Press to exit from the SKIP.
TV/AV
This returns the set to the normal
viewing condition.
4
STR
Press to store the Skip function.
3
Press to change the mode to ON.
Press to select the SKIP.
Press briefly to tune the best
position.
Press to access to MANUAL TUNE.
3
Press to select the MANUAL TUNE.
SYS SELECT
CH SELECT
AUTO TUNE
MANUAL TUNE
FINE TUNE
SKIP
SOUND SYS
COLOUR SYS
AUTO
OFF
ACCESS
POSITION
5. 5 MHz
ASIA / M.EAST
SYS SELECT
CH SELECT
AUTO TUNE
MANUAL TUNE
FINE TUNE
SKIP
SOUND SYS
COLOUR SYS
AUTO
OFF
POSITION
5. 5 MHz
ASIA / M.EAST
SYS SELECT
CH SELECT
AUTO TUNE
MANUAL TUNE
FINE TUNE
SKIP
SOUND SYS
COLOUR SYS
AUTO
ON
POSITION
5. 5 MHz
ASIA / M.EAST