Panasonic TX-51P800X Projection Television User Manual


 
19
Manual Tune
MANUAL TUNE
Press to select the MANUAL TUNE.
Press to access to the MANUAL TUNE.
1
1
SYS SELECT
CH SELECT
AUTO TUNE
MANUAL TUNE
FINE TUNE
SKIP
SOUND SYS
COLOUR SYS
AUTO
OFF
ACCESS
POSITION
5. 5 MHz
ASIA / M.EAST
Tuning Channels
Before Manual Tune, Channel Select and Regional System must already be set (Refer to page 16).
SOUND SYS
Press to display the SETUP MENU.
Proceed to the TUNING MENU, and then to the SOUND SYS (refer to page 13).
2
SET UP
Helpful Hint
(1) If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, refer to the Colour
System Selection operation on page 21.
(2)
(3) When using a VCR without video and audio input/output terminals, it is convenient to connect the aerial cable as indicated in the
instruction manual of VCR and to set the designated channel to programme No. 0. In that case, perform manual tune after
setting the colour system and sound system in advance. Further, in multi-system VCR, it is more convenient to set the designated
channel to several programme Numbers.
After the Manual tune or the Automatic tune is finished, under the normal viewing condition press this button
to confirm the tuning condition for each Programme Number. If some Programme Numbers are unused (no
TV stations), it is possible to skip such Programme Numbers. Please refer to the Programme Number Skip
operation on page 20.
2
Search Start.
CH 12
29
MANUAL TUNE
PROGRAMME
-
/+
SEARCH
-
/+
RETURN
TV
/
AV
-
EXIT
STR BUTTON-STORE
Press to select the desired Programme Number.
Press to select the higher or lower channel.
When a station is found.
When the desired station is found, press to store.
The tuning position is memorized.
STR
Press to exit from the Tuning Menu.
This returns the set to the normal viewing condition.
TV/AV
Adjust the Sound System (refer to page 18 step 2 to 3).
3