Filter
Top Products
31
(4) After completing the settings, press the [MENU] button
again to close the camera setup menu.
Caution: When displaying the Special Menu, move the
cursor to "SPECIAL" on the camera setup menu and
press the camera selection button [2].
When returning the camera settings to the default
settings, move the cursor to "CAMERA RESET" and
press the camera selection button [3].
Press the [ESC] button to move from the Special
menu back to the previous menu.
2.6 Control this Unit with a PC
When this unit is connected to a network, it is possible to
operate and set up this unit with the software on the acces-
sory disc.
In this case, outlined explanations will be given about the
functions available and requirements for the computer con-
figuration.
For details about each function, refer to the Network
Operating Instructions on the accessory disc.
2.6.1 Outlined functions
• Display of live monitoring screen and recording
• Playback and downloading of the recorded data
• Setup of this unit
• Event notification (Alarm)
• Automatic time and date adjustment
2.6.2 Computer configuration
A computer with the configuration specified below is rec-
ommended. If a computer other than the recommended
one is used, some problems may arise including software
not starting, delayed screen display, and operation failures.
Notes:
* If the Graphic Memory is not over 32 MB, only a maxi-
mum of four channels can be connected to the
NetClient.
* The NetClient cannot be started unless the display driv-
er overlay is applied.
* For some display driver versions, the NetClient may fail
to start normally. In this case, update the display driver
to the latest version.
OS
PC
CPU
Main
Memory
Graphic
Memory
Display
Driver
Interface
Monitor
Others
Microsoft Windows 2000 Professional SP4
Microsoft Windows XP Professional or Edition
SP2
IBM PC/AT Compatible
Intel Pentium 4, 2.4 GHz or faster
DDR 512 MB
Independent larger than 64 MB
Overlay supported
100 MB network interface card built-in
Resolution: better than 1024 x 768,
24 bit true color
Direct X 8.0a or later