Panasonic WJ-RT208 DVD Recorder User Manual


 
39
(2) Move the cursor to "AUDIO SELECT" and press the
[SET] button.
(3) Use the direction button (up/down) and move the cur-
sor to the setting channel. The radio button is lit up and
recording takes place when the audio signals are sent.
Note: Even though recording is performed within the
same time period, much more hard disk capacity is
needed for recording with audio signals than
recording without audio signals.
3.1.4 PTZ setup (PTZ SETUP)
PTZ selection (PTZ SELECT)
For the selection of the camera, refer to "2.5 Camera
Control."
Preset position information (PRESET INFORMA-
TION)
(1) Press the [MENU] button. Move the cursor to "PTZ
SETUP" and press the [SET] button.
(2) Move the cursor to "PRESET INFORMATION" on the
"PTZ SETUP" dialog box and press the [SET] button.
Camera No.: 1-8
Default: 1 (Adjusted with the (right/left) direction
button)
Preset: 001 - 256
Default: 001 (Move the cursor by using the direction
button (right or left), and enter the preset posi-
tion number by using the numeric buttons.
Call: Move the cursor to "Call" and press the [SET] but-
ton. The camera turns to the preset position of the
selected number.
Note: For PTZ preset position setting, refer to 2.5.6.
(3) When confirmation is completed, move the cursor to
[Return] and press the [SET] button.
3.1.5 Camera setup "CAMERA SETUP"
(1) Press the [MENU] button. "WJ-RT208 SETUP MENU"
appears.
(2) Move the cursor to "CAMERA SETUP" and press the
[SET] button.
Camera No.: 1 - 8
Default: 1
CH Enable: "On/Off"
Default: "On"
Mask Area: Refer to note 4 below.
Mask Enable: "On/Off"
Default: "Off"
PTZ Protocol: "PANASONIC/TYPE1/TYPE2/TYPE3/
TYPE4"
Default: "PANASONIC"
Rec. Reserve: 000 - 200
Default: 000
OK
Audio1
AUDIO SELECT
Cancel
Audio2 Audio3 Audio4
Audio5 Audio6 Audio7 Audio8
PTZ SETUP
PTZ SELECT
PRESET INFORMATION
PRESET INFORMATION
Return
1Camera
001Preset
Call
WJ-RT208 SETUP MENU
SYSTEM MANAGEMENT
SEARCH
REC&EVENT SETUP
PTZ SETUP
CAMERA SETUP
COMMUNICATION SETUP
REPORT
USER INFORMATION
DATA MANAGEMENT
CAMERA SETUP
1Channel No.
OnCH Enable
SetMask Area
OffMask Enable
PANASONICPTZ Protocol
000
All OK Cancel
Rec. Reserve
Channel Name CH1
Days