Filter
Top Products
12
S2-4 and S2-5: RTS/CTS Delay
The combined settings for switches S2-4 and S2-5 determine the
amount of delay between the time the Model 1080ARC “sees” RTS and
when it sends CTS. Options are no delay, 7 ms and 53 ms (see Table 9).
S2-6: Extended Signaling Rate
The setting for switch S2-6 determines the range of variability the Model
1080ARC “looks for” in asynchronous data rates (i.e., the actual variance
from a given frequency level the Model 1080ARC will tolerate (see
Table 10).
S2-7 and S2-8: Word Length
Switches S2-7 and S2-8 are set in combination to determine the word
length for asynchronous/synchronous data (see Table 11).
Table 9:
RTS/CTS Delay Settings
S2-4 S2-5 Setting
On On 7 ms
On Off 53 ms
Off On No delay
Off Off No delay
Table 10:
Extended Signaling Rate Settings
S2-6 Setting
Off -2.5% to +1%
On -2.5% to +2.3%
Table 11:
Word Length Settings
S2-7 S2-8 Setting
On Off 8 bits
On On 9 bits
Off Off 10 bits
Off On 11 bits