Filter
Top Products
13
3.4 CONFIGURATION SWITCH SET S3
The DIP switches on S3 set the antistream control, local loopback
enable, remote loopback enable and receive (input) impedance levels for
the Model 1080ARC. The default settings are summarized in Table 12
and Table 13.
Table 12:
Summary of DIP switch default settings for S3
Position Function Factory Default
S3-1 Input Impedance On 200 Ohms
S3-2 Input Impedance Off 200 Ohms
S3-3 Not yet assigned n/a
S3-4 Mode Selection On Point to Point
S3-5 Local Loopback Off Disabled
S3-6 Remote Loopback Off Disabled
S3-7 Antistream Control Off Disabled
S3-8 Antistream Control Off Disabled
Table 13:
Selection Table for S3-1, S3-2
Data Rates (kbps)
Cable
gauge
1.2 1.8 2.4 3.6 4.8 7.2 9.6 14.4 19.2 28.8 38.4 57.6
19 320 320 200 200 200 200 200 130 130 130 130 130
22 320 320 320 200 200 200 200 200 130 130 130 130
24 320 320 320 320 200 200 200 200 200 130 130 130
26
320 320 320 320 320 200 200 200 200 200 130 130