Filter
Top Products
15
S3-6: RS-232 Initiation of Remote Loopback Test
The setting for switch S3-6 determines whether or not the Model
1080ARC’s remote digital loopback test can be initiated by raising pin 21
on the RS-232 interface (see Table 17).
S3-7 and S3-8: Antistream Control
Switches S3-7 and S3-8 are set in combination to determine the timeout
period for the Model 1080ARC’s antistream control timer (see Table 18).
Table 17:
RS-232 Remote Loopback Settings
S3-6 Setting
On RS-232 initiation enabled
Off RS-232 initiation disabled
Table 18:
Antistream Control Settings
S3-7 S3-8 Setting
Off Off Disabled
Off On 12.5 seconds
On Off 50 seconds
On On 12.5 seconds