34
APPENDIX B
CABLE RECOMMENDATIONS
All Patton Electronics Company Short Range Modems are tested to the
distances published in our Catalogs and Specification Sheets on twisted-
pair cable with the following characteristics:
We fully expect that the Short Range Modems will operate on lines with
specifications different from those tested, but to reduce the potential diffi-
culties in the field, one should ensure that the cable being used has sim-
ilar or better characteristics (lower capacitance or lower resistance).
Wire with capacitance of 20pF/ft. or less is suitable for all our Short
Range Modems however, distances may vary from those published in
our catalog. Resistance will also affect distance but not functionality.
Wire should be 26 AWG or larger (smaller AWG#).
Patton products are designed to withstand normal environmental noise
and conditions however, other environmental factors too numerous to
discuss in this format may affect proper operation of the SRM’s.
Wire Gauge Capacitance Resistance
19 AWG 83nF/mi or 15.72 pF/ft. .0163 ft.
22 AWG 83nF/mi or 15.72 pF/ft. .0326 ft.
24 AWG 83nF/mi or 15.72 pF/ft. .05165 ft.
26 AWG 83nF/mi or 15.72 pF/ft. .08235 ft.
Model 1080A Distance Table (miles)
Wire Gauge
Data Rate 19 22 24 26
57,600 12 7.0 5.3 4.0
38,400 13 7.5 6.2 4.2
28,800 14 8.0 6.6 4.6
19,200 16 8.5 7.0 5.1
14,400 17 11.0 9.2 6.5
9,600 18.5 13.0 10.4 7.5
7,200 19.0 13.5 10.9 8.0
4,800 19.5 14.0 11.3 8.8
3,600 20 14.5 11.5 8.8
2,400 20.5 15.0 11.6 9.0
1,800 20.5 15.0 11.5 8.9
1,200 20 15.0 11.4 8.9