Pelco C689M (5/01) Universal Remote User Manual


 
Pelco Manual C689M (5/01) 3
DESCRIPTION
The DX3016RX Remote Viewing Software is designed for use with Microsoft Windows
®
98,
Windows 2000, and Windows Me. In combination with the DX3016 Series Digital Video Re-
corder (DVR) and an Ethernet LAN (local area network), the software can acquire live and
recorded images from the DVR. The software can play back recorded images even while
the DVR is recording.
INSTALLATION
To use the software, you need a computer that meets the following minimum requirements:
IBM PC/AT-compatible with Intel Pentium
®
Series or Intel Celeron™ Series CPU
(400 MHz or faster)
Microsoft Windows 98, Windows 2000, or Windows Me
128 MB of RAM
Display resolution with a minimum of 800 pixels by 600 lines; 1024 pixels by 768 lines
is recommended
•Video card and monitor capable of displaying 32,000 colors
200 MB of free hard disk space
Microsoft Internet Explorer 4.01, Service Pack 1, or later
Network interface card compatible with the environment described above
SOFTWARE INSTALLATION
To install the DX3016RX software:
1. Insert the CD in the computer’s CD drive.
2. Double-click the My Computer icon on the desktop.
3. Double-click the drive for the CD disk.
4. Double-click the Dxrx100 folder to open it.
5. Double-click the Setup.EXE file to start the installation.
6. Follow the on-screen instructions.
NOTE:
Operation is not
guaranteed for all environ-
ments conforming to these
requirements.