Pelco Manual C689M (5/01) 7
CONNECT TO A DVR
To connect to a DVR:
1. If the Network window is not open, click Network on the toolbar, and then click Re-
corder List. The Network window appears.
Figure 4. Network Window
When you start the software, the Network window appears automatically if there are
any recorders in the list.
2. Highlight the DVR you want to connect to, and then click Connect. When the connec-
tion is completed, video appears. The connection will not be completed if the DVR has
no data recorded on it.
Figure 5. Main Screen with Video
00801
00806
NOTE:
When the software
connects to a DVR, the DVR
is placed in the Lock mode.
Operation of the DVR
through the front panel
buttons (except the camera
buttons) or the RS-232C
terminal is not possible
while the recorder is in this
mode.