6 Pelco Manual C689M (5/01)
OPERATION
RESTRICTIONS
The playback speed of the DX3016RX is determined by the computer’s processing speed,
type of playback devices used, network traffic, and other factors. For these reasons, there
will be cases where the software’s playback speed does not match the recording intervals
of the DVR.
Depending on the condition of the DVR recording (for example, if the date and time infor-
mation are in reverse order), there may be instances when playback, searches, and other
functions cannot be correctly performed.
Depending on the printer or printer driver used, there may be instances where images and/
or text data are not printed correctly.
The DX3016RX consumes a large amount of memory in order to display and update image
data. Avoid running other application programs while using the DX3016RX.
The DVR’s Lock function is activated when using the DX3016RX software, which prevents
use of the RS-232C terminal and the front panel buttons (except the camera buttons).
After disconnecting from the DVR, use a ballpoint pen or similar instrument to press the
REMOTE communication button on the DVR to enable the front panel buttons and the
RS-232C terminal.
The quality of the images displayed by the DX3016RX depends on the image quality set-
tings used by the recorder at the time of recording. Other factors, however, will also affect
quality when images are displayed at higher than 100 percent magnification.
START A VIEWING SESSION
To begin a remote viewing session, select Dx3016rx under Programs in the Start menu,
and then select DX3016RX. The DX3016RX main screen appears.
Figure 3. DX3016RX Main Screen
END A VIEWING SESSION
To end a viewing session, click Exit in the File menu.
00796