10 Pelco Manual C680M-G (7/01)
RESOLUTION
Lowest resolution: Off
Low resolution: Off
Standard resolution: On
High resolution: Off
Highest resolution: Off
Quit
FUNCTION KEY LIST
0 : Setup
1 : Camera 1 recording/stop
2 : Camera 2 recording/stop
3 : Camera 3 recording/stop
4 : Camera 4 recording/stop
5 : All the cameras recording
6 : All the cameras stop
: Alarm On
: Alarm Off
SETUP MENU
Camera
All Resolution
Alarm Output
Time
Password
Exit
Help: ON
ALL RESOLUTION MENU
Use this menu to set the resolution for all cameras. If you want to use different resolutions
for the cameras, set the resolutions in the Camera menu (previous section).
Skip steps 1 and 2 if you are already in the Setup Menu.
1. Press and hold the Function button. The Function Key List appears. Keep holding the
Function button.
2. Press and release the 0 button, and then release the Function button. Enter the pass-
word if requested. The Setup Menu appears.
3. Use the Search (<</>>) buttons to highlight All Resolution, and then press the
Play/Pause button to select. The All Resolution menu appears.
4. Use the Search (<</>>) buttons to highlight a resolution, and then press the
Play/Pause button. When one resolution is turned On, all others are set Off.
5. Use the Search (<</>>) buttons to highlight Quit, and then press the Play/Pause but-
ton to select. The Setup Menu appears.
6. Use the Search (<</>>) buttons to highlight another menu item in the Setup Menu
and then press the Play/Pause button to select it, or highlight Exit and then press
the Play/Pause button to end the programming session.
NOTE:
Setting the
resolution in this menu will
overwrite all camera
resolution settings made in
the individual camera
settings (step 11 of previous
section).
NOTE:
Higher resolutions
require more disk storage
space, reducing the
recording time; lower
resolutions need less disk
space, increasing the
recording time.
TIP:
Pressing the Stop
button also returns you to
the Setup Menu.
