Filter
Top Products
Pelco Manual C682M-E (11/01) 47
LOAD THE DRIVER FOR THE MODEM
1. From the DISPLAY mode of the DX7000, click the EXIT button. A dialog box appears.
Select Yes. The DX7000 shuts off.
2. Turn ON the modem and restart the DX7000 system by pushing the ON/OFF switch
located on the front panel.
3. The DX7000 detects the new hardware. After a few seconds the Add New Hardware
Wizard pops-up on the screen with the following message:
4. Click Next and the following appears:
01187
01188