Filter
Top Products
Pelco Manual C651M (7/99) 41
9.2.2 Direct Shuttle Ring
You can also change the playback speed without entering pause mode by turning
the SHUTTLE ring during playback. Releasing the SHUTTLE ring returns it to the
center position and resumes normal playback.
Reverse high speed search
Reverse speed search
Reverse fast playback (x3)
Normal playback
Fast playback (x2)
Forward speed search
Forward high speed search
3
9(5)
15(7)
2
9(5)
15(7)
( ) indicates the playback speed of the recorded tape in 2H mode.
Figure 27. Direct Shuttle Ring Speed Settings
9.2.3 Still Picture
You can get a still picture by pressing the PAUSE/SHUTTLE HOLD button during
playback. Press it again to resume normal playback.
9.2.4 Frame-By-Frame Playback
You can use the JOG dial to advance the tape frame by frame.
1. While the VCR is playing a tape, press the PAUSE/SHUTTLE HOLD button to
freeze the picture.
2. Slightly rotate the JOG dial clockwise to advance the tape, or counterclock-
wise to reverse the tape. To get a continuous frame-by-frame picture, keep
rotating the JOG dial.
3. Press the PLAY button to resume normal playback.
NOTE:
A few noise bars or verti-
cal movement may appear during
still playback.
NOTES:
• Noise bars may appear on the
picture when switching between
forward and reverse playback.
• A few noise bars or vertical
movement may appear during
frame-by-frame playback.