Filter
Top Products
151515Use of the menus
With two extra front loudspeakers connected
To enhance the sound reproduction of your TV you
may connect two extra front loudspeakers via an
external amplifier. See Connect Peripheral Equipment,
Extra loudspeakers/Amplifier, p. 23.
In the Surround modes
+ ext. amp is added to
indicate that you should switch on your amplifier as
in these modes the internal TV speakers produce
only centre sound.The subwoofer speaker is muted.
Note: If extra front speakers are connected and selected,
all internal TV speakers produce centre sound in the
surround modes Pro Logic*, Dolby 3 Stereo and 3D
Surround.
Features menu
‘Dolby’ ‘Pro Logic’ and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
Manufactured under license from Dolby Laboratories Licensing Corporation.
*
Features
Channel list
Subtitle
Sleeptimer
Child lock
On timer
Lock
Custom lock
Unlock
Channel lock
TV
Press the cursor right to select Features.
Select the menu items in the Features menu with
the cursor up/down and adjust the settings with
the cursor left/right.
Use the on-screen Menu-Info i for more
information about the menu items.
Channel list
Press the OK key to switch over to the selected
TV channel or external.
Select subtitles
Switch on teletext and select the proper subtitle
page from the index.
Switch off teletext.Now the subtitle page is
stored for the selected TV channel.
Once subtitles have been stored and
Subtitle
On
has been selected they will automatically be
displayed on the selected TV channels if subtitles
are in the transmission.
A symbol will indicate that the mode is on.
Select
On during mute when you want to have
the subtitles automatically displayed when the
sound has been muted with the ¬ key on the
remote control.
Child lock
& Select
Child lock with the cursor down.
é Press the cursor right to enter the Child lock
menu.You’re summoned to enter your code.
Enter the access code.
Note:You have to re-enter your code each time you
enter the child lock menu.
Important:You have forgotten your code !
• Select Cancel with the cursor down.
• Select Set/Change code in the Setup
menu. See General menu, Set/Change
code, p. 11.
• Press OK.
• Press the cursor right and enter the
overriding code 8-8-8-8.
• Press the cursor again and enter a new
personal 4-digit code.The previous code is
erased and the new code is stored.
Note:The overriding code only works in the
Set/Change code menu.
“ Select one of the menu items of the child lock
menu.
• Select
Lock if you want to lock all channels
and externals.
• Select
Custom lock and press the cursor
right. Select Channel lock if you want to lock
the programmes from a certain TV channel or
external.
• Select
Unlock to unlock all locked channels
and externals at once.
315 2163.1 (16X24) 22-10-2002 13:15 Pagina 15