Filter
Top Products
16 EN
Automatically switch the TV on (on
timer)
You can switch on the TV from standby to a
specic channel at a specied time.
1 Press MENU > [PBS Settings] >
[Consumer Setup] > [Yes].
» The consumer menu appears.
2 Press to select [Features] > [On
timer].
3 Press to enter the [On timer] menu.
• [Activate]: Selects how often the TV
is switched on.
• [Time]: Sets the time to switch on the
TV.
• [Program no.]: Selects the channel or
the connected device.
4 Press MENU to exit.
Tip
• Select [On timer] > [Activate] > [Off] to
disable this feature.
• When [On timer] is switched off, only
[Activate] option is available.
Use TV locks
You can prevent your children from watching
certain programs or channels by locking the TV
controls.
Set or change your PIN code
1 Press MENU > [PBS Settings] >
[Consumer Setup] > [Yes].
» The consumer menu appears.
2 Press to select [Features] > [Set
code] / [Change code].
» The [Set code] / [Change code] menu
appears.
3 Enter your code using the Numeric
buttons.
» Follow the on-screen instructions to
create or change your PIN code.
Tip
• If you forget your code, enter ‘8888’ to
override any existing codes.
Lock or unlock the TV
Lock the TV to prevent access to all channels
and connected devices.
1 Press MENU > [PBS Settings] >
[Consumer Setup] > [Yes].
» The consumer menu appears.
2 Press to select [Features] > [TV
lock].
» You are prompted to enter your PIN
code.
3 Enter your code using Numeric buttons.
» The [TV lock] menu appears.
4 Press to select [Lock] or [Unlock].