Filter
Top Products
11
• Set Your Minimum (0), Maximum (100), And Switch On
(0-100) Volume.
• Default switch on volume = 12
• Any Welcome Message For Guest: “Yes”, “No”.
• Any Welcome Picture For Guest: “Yes”, “No”.
• Welcome Picture enables a customizable picture to
be shown at TV startup to welcome the guest, before
the TV switches to the channel or input source that is
defi ned in Switch On Program.
Note
The welcome picture must be in the png format, and
have the name WelcomeLogo.png and it must be on
the USB drive in a folder named BUH_Logos. The size
of the picture must be Width ≤ 940 pixels and Height ≤
540 pixels. (Use of transparent background can create
interesting images!)
• Any Local Information And / Or Advertising To Guest:
“Yes”, “No”.
Note
This TV has the capability to add a custom Hotel Logo
icon to the Home guest menu screen (replaces the
“PHILIPS” in the lower right corner). Then this icon
can be assigned to a channel where the property runs
informational or advertising programming. So when the
guest clicks on this icon, the TV will switch to the assigned
program. Similarly to the Welcome Logo, the Hotel Logo
must be in the png format, and have the name HotelLogo.
png and it must be on the USB drive in a folder named
BUH_Logos. The size of the picture must be Width
= 266 pixels and Height = 136 pixels. (Again, use of
transparent background can create interesting images!) A
smaller image can be used, but it should be centered in a
canvas of the size specified.
• Any AV Source To Block: “Yes”, “No”.
• Select Your Multi RC Settings: “Off”, “Blue”, “Yellow”,
“Green”, “Red”.
• Multi RC enables control of multiple TVs in a room
without any interference from each other’s remote
control.
• To enable MultiRC, each TV and its associated remote
control is set to one of the four colors – blue,
yellow, green, red. Each TV in the room is separately
programmed to a remote control of one of those
colors.
Set the TV to a particular RC:
» Use the set-up remote control and go to the PPV/
VOD options.
» Press ▼►to go to the Multi RC option.