Filter
Top Products
24
■ RF Channel Number: This function selects the RF
channel number where the TV can find the clone data.
Note that both the PSG must be set to broadcast on the
same channel that the TV must be set to receive.
■ Source to TV: This function will initiate the cloning
process of data from the selected source to the TV.
■ TV to USB : This function will clone the data from the
TV to a USB device.
TV Upgrade
This section enables the upgrading of the TV software
via USB or RF. It also allows the configuration of the
SmartUpdate feature to enable the TV to be automatically
upgraded.
■ Source: “RF”, “USB” – This function Select the Source
from which the TV Upgrade data will be received. Like
the SmartClone function, the RF option requires a PSG
installed in the property head end to broadcast the data
to the TVs. For more information, contact your Philips
sales representative.
■ Direction: “USB To TV”, “TV to USB”
■ RF Channel Number