Filter
Top Products
23
■ Power On: “Last Status”, “On”, “Standby”, “Forced On”.
Default setting is “Standby”. When power to the TV is
interrupted, this function sets the state that the TV will
return to when power is restored.
• If set to Standby, the TV will always resume into
Standby mode when power is restored (default
setting).
• If set to Last Status, the TV will resume to the mode it
was in when power was lost.
• If set to On, the TV will always turn-on into On mode
when power is restored...
• If set to Forced On, the TV will turn-on to On mode,
but it cannot be turned off. (for applications where TV
is always on and you do not want anyone accidentally
turning it off.)
■ SmartGuide Category: “SmartGuide”, “High Definition”,
“Sports”, “News”, “Kids”, Movies”, Network”, “Adult/
Hospital”, “Lifestyle”, “Other/Education”
• If you choose yes, than you have the further ability to
enable/disable the available individual categories: High
Defi nition; Sports; News; Kids; Movies; Network; Adult/
Hospital*; Lifestyle; Other/Education*
* Categories are Hospital and Education for Healthcare
TVs (“H” models) or Adult and Other for Hospitality
TVs (“D”, “L”, “F” models)
• Default setting is “No”
■ Clock Setup
• This feature allows the entering of TV channel number
that will provide the date and clock information. This
must be a digital channel containing an STT table
(almost all digital channels do.)
■ Factory Default will reset the factory out-of-box settings.
Warning
• There is no confi rmation request - if you press right arrow
here, all programming is immediately and irrevocably reset
to default values.
SmartClone
This section enables the cloning of TV settings via USB, RF.
■ Source: “RF”, “USB” – This function selects the Source
from which the Clone data will be received. To receive
data over RF requires an additional piece of equipment
(PSG) installed in the property head end to transmit the
data to the TVs. Contact your Philips sales associate for
more information.