Filter
Top Products
8
& Press the v key repeatedly to select AV1, AV2, AV3, Side or
TV channels, according to where you connected your devices.
é Press the cursor up/down.
“ Press OK.
b
v
VCR DVD TV SAT AMP
†
®
®
®®
π
®
TV PC HD
v
B
OK
SELECT
Ò‡
º
To select connected devices
Connect your computer
1
2
HDMI
AV3
L
UADIO
R
VGA
Y/Pb/Pr (2Fh)
You may connect your computer to the VGA connector of
AV3 or to the HDMI connector (see further).
& Connect one end of a VGA cable 1 to the video card
of the computer and the other end to the
VGA Y/Pb/Pr
2Fh
1 connector at the bottom of the TV.
Fix the connectors firmly with the screws on the plug.
é In case of a Multimedia computer,connect the audio
cable 2 to the audio outputs of your Multimedia
computer and to the
AUDIO R (right) and L (left)
inputs.
The
VGA connector allows the following TV and
monitor display modes:
VGA 640 x 480 60 Hz
SVGA 800 x 600 60 Hz
XGA 1024 x 768 60 Hz
Note:
If possible, use the XGA1024x768@60Hz video mode to
obtain the best image quality for your 30PF9946 LCD
monitor.
Record with your recorder
To record S-VHS quality, connect an S-VHS
peripheral directly to the recorder.
Record a TV program
You can record a TV program using your recorders
tuner without affecting your TV.
& Select the channel number on your recorder.
é Set your recorder to record.
See the handbook for your recorder.
Switching channel numbers on your TV does not
disturb recording !
Record a recorder from
MONITOR OUT
You can record a program on your recorder from
the TV tuner via
MONITOR OUT.
& Switch on the device.
é Select the correct channel on your TV and the
correct input on your recorder.
“ Set your recorder to record.
You record the tuner channel of the TV,even
when you switch to an AV input using the
v key on the remote control.
Do not switch channels or turn off your TV when
you are recording through
MONITOR OUT.
2375.1 en 16-07-2004 16:07 Pagina 8