Filter
Top Products
10
Features menu
It is possible to change the name stored in the
memory or to assign a name to a TV channel or
external for which a name has not yet been
entered.A name with up to 5 letters or numbers
can be given to the programme numbers 0 to 99.
Note : It is not possible to rename the VGA source.
& Select Name in the Install menu and press the
cursor right.
é Select the programme number.
Note: keep the cursor up/down pressed to scroll
through the programme list quickly.
“ Select the following character with the cursor
up/down.
‘ Select the following position with the cursor
right.
( Select the following character.
§ Press the cursor left when finished.
è Select another programme number and repeat
steps
é to §.
! Press the MENU key to return to the TV
menu. Press again to exit the TV menu.
Note: space, numbers and other special characters
are located between Z and A.
Give name
This feature allows you to edit or skip channels
from the channel list which have bad of weak
signals or channels which you do not watch often.
Note: Once a channel is skipped, you cannot select it
with the
-P+ key; you can only access the channel with
the digit keys.
& Select Channel edit in the Install menu;
é Press the cursor right to enter the channel list.
“ Select the channel you want to skip with the
cursor left/right.
‘ Press the cursor down to select Skipped On
or Off.
( Press the cursor up/down to select another
channel and repeat step
‘.
§ Press the cursor left or the MENU key to
return to the Install menu.
Note:To add back channels to the list, repeat steps
& to ‘ and press the MENU key to switch
menu off.
Editing of channels
Timer
This menu lets you use the TV set as an alarm.
& Press the MENU key.
é With the cursor,select Features, then Timer.
“ Time: enter the current time.
‘ Start Time: enter the start time.
( Stop Time: enter the standby time.
§ Channel: enter the number of the channel for
the wake-up alarm.
è Activate: the settings include:
•
Once for a single alarm;
•
Daily for each day,
•
Off to cancel.
! Display:press the cursor right to select On or
Off, according to if you want to display the
current time on the TV screen or not.
ç Press the B key on the remote control to put
the TV set in standby. It will automatically come
on at the time programmed.If you leave the TV
set on, it will just change programmes at the
time entered (and will go to standby mode at
the Stop Time).
Note: By combining the Child lock and Timer
functions, you can restrict the period during which
the TV set is used, for example by your children.
2375.1 en 16-07-2004 16:07 Pagina 10