Filter
Top Products
3
Use of the remote control RC4333
†®Ò‡πº
Audio and Video equipment keys.
TV / PC / HD
Press one of these keys to switch
the television between TV or PC
mode (p. 13) or to select your
connected Digital High Definition
device.
Press
HD once for HD-A (YPbPr);
twice for HD-D (HDMI).
PIP (Picture in Picture) On/Off
See p. 11.
V To adjust the volume.
i On Screen information
To display/remove the programme
number,the name (if it exists), the
time, the sound mode and the time
remaining on the timer.
Hold down for 5 seconds to
permanently display the programme
number on the screen.The volume
level and the smart control
adjustments are then displayed each
time they are used.
D Sleeptimer
To select the length of time before
the set automatically switches to
standby (from 0 to 240 minutes).
VCR DVD TV SAT AMP
Press the SELECT key repeatedly
to select one of the system modes
in which the remote control can be
used. If no action is being
undertaken within 2 seconds,the
remote control returns to TV mode.
After an action in the selected
system mode the remote control
will remain in this mode for 60
seconds and will then return to TV
mode.
v Select your peripherals
See p. 8.
b Teletext On/Mix/Off see p.12
Colour keys, see Teletext, p. 12.
OK Press this key
- to activate your choice, when in
the menus;
- to display the channel list.
MENU Main menu on/off see p. 9
¬ Interrupt the sound or restore it.
PProgramme selection
To move up or down a programme.
The number,(the name) and the
sound modes are displayed for a few
seconds.
For some TV programmes the title of
the programme appears at the bottom
of the screen.
0/9 Digit keys
To select a TV channel.
For a two digit programme number,
enter the second digit before the
dash disappears.To switch
immediately to a selected one digit
TV channel, keep the digit key
pressed a bit longer.
0 Previous TV channel
Press to display the previously
selected TV channel.
:g Teletext keys, see p. 12.
X Sound mode
To switch from Stereo or Nicam
Stereo to Mono, or to choose
between Dual
Y or Dual Z in case
of bilingual transmission.
When the sound mode is Mono, the
indication is displayed in red.
h Active control On/Off/On with
Sensor
Optimizes the quality of the picture
according to the quality or
reception.
Note: For most keys pressing a key once will activate the function. Pressing a second time will de-activate it.
Remark: in VGA mode only some keys are valid.
b
¬
+
-
V
+
-
P
v
i
0
VCR DVD TV SAT AMP
MENUPIP
123
456
789
0
π
†
®
®
®
®
q
g:
h
X
D
SLEEP
SMART SMART
aM
B
OK
SELECT
Ò‡
®
º
TV PC HD
B Standby
Press to switch the TV on or off.
2375.1 en 16-07-2004 16:07 Pagina 3