Filter
Top Products
9
How to search for and store TV channels
If you want to re-install your TV proceed as follows:
& Press the MENU key on the remote control.
é Use the cursor up/down to select Install.
“ Press the cursor right to enter the Install menu.
‘ Use the cursor left/right to select your language.
TV Menu
Picture Language
Sound Auto Store
Features Manual Store
Install π Sort
Mode Name
Channel Edit
Auto store
& Select Auto Store in the Install menu.
The autostore option label
Start ? appears.
é Press the cursor right.
“ The progress of autoprogramming is displayed.
You can use the Sort menu to renumber the
stored TV channels.
Note: Channel numbers will always be written in
Latin characters, even when a language has been
selected which uses other characters.
Sorting TV channels
& Select Sort in the Install menu and press the
cursor right
é Select the TV channel you want to move using
the cursor up/down and press cursor right.
“ Select the new number and validate with the
cursor left.
‘ Repeat steps é and “ for each TV channel
you wish to renumber.
( To exit the menus, press the MENU key
repeatedly.
Manual store
Searching for and storing TV channels is done
channel by channel.You must go through every step
of the Manual Installation menu.
& Select Manual Store in the Install menu and
press the cursor right to enter.
é Select Colour system and press the cursor
right.
If
Auto is selected, the respective colour
system will be automatically selected according
to the transmission system.
If the reception is poor, select another colour system
with the cursor up/down.
“ Press the MENU key or the cursor down.
‘ Select Sound system and press the cursor
right. If
Auto is selected, the respective sound
system will be automatically selected according
to the transmission system.
Note: if the reception is poor, select another sound
system with the cursor up/down.
( Press the MENU key or the cursor down.
§ Search for a TV channel:
Press the cursor down to select
Search and
press the cursor right to start searching.
Direct selection of a TV channel:
If you know the frequency, enter it directly with the
digit keys 0 to 9.Ask for a list from your cable
company or dealer, alternatively consult the Table of
frequencies on the inside backcover of this
handbook.
è Press the cursor down and enter the
programme number with the digit keys.
!
Fine tune:
In case of poor reception,you can improve the
reception by adjusting the frequency with the
cursor left/right.
ç To store your TV channel, select
Store and
press the cursor right.Repeat steps é to !
to store another TV channel.
0 To exit from the menu press the
MENU key on
the remote control.
Install
Language ....
Auto Store 10 p
Manual Store 11
Sort π 12 π
Name 13
Channel Edit
Install
Language Colour System
Auto Store Sound System
Manual Store π Search
Sort Channel
Name Fine tune
Channel edit Store
Auto Store
Channel π ..........
TV π freq
o
p π
œ
2375.1 en 16-07-2004 16:07 Pagina 9