Filter
Top Products
iPronto User Guide
18
Getting the iPronto Up and Running
Adjusting the Date
1 Select the General tab in the System Settings.
2 Select the box that you want to modify (Months, Days or Years box).
The selection appears with a highlighted border.
3 Use the + and – buttons to set the correct months, days and years.
Adjusting the Brightness
You can set the brightness of the touch screen in 16 intervals.
1 Select the General tab in the System Settings.
2 In the LCD Brightness section, use the + and – buttons to set the brightness.
Adjusting the Power off Time Out
Time Out when iPronto is running on the battery
1 Select the General tab in the System Settings.
2 In the LCD power off when on batteries section, use the + and – buttons to set the LCD time out.
You can choose a time out between 30 seconds and 15 minutes.
Time Out when iPronto is plugged into the power adapter
1 Select the General tab in the System Settings.
2 In the LCD power off when AC plugged in section, use the + and – buttons to set the LCD time out.
You can choose a time out between 30 seconds and 14 minutes, or you can choose to always leave the display on.
iPronto 1.6 IFU En .qxd 22-04-2004 17:23 Pagina 18