Filter
Top Products
iPronto User Guide
22
Getting the iPronto Up and Running
Follow these steps to set your wireless settings.
1Press and hold the scroll wheel for 5 seconds to display the System Settings.
2 Select the Wireless tab in the System Settings.
3To change the default name of the Service Set Identifier (SSID), enter the new name in the Service Set
Identifier text box. The SSID is a name that identifies your wireless network.
4 If encryption is enabled in your wireless network, select the correct encryption in the Wireless Network
Encryption section:
■ 64 bit;
■ 128 bit.
5 If encryption is enabled in your wireless network, enter your Encryption pass phrase in the Encryption
pass phrase text box.
The Encoding key text box is automatically filled in. The Encryption pass phrase must be identical to your WAP’s
Encryption pass phrase.
iPronto 1.6 IFU En .qxd 22-04-2004 17:23 Pagina 22