Filter
Top Products
iPronto User Guide
24
Getting the iPronto Up and Running
3To create a personal name for your iPronto, enter the name in the iPronto host name text box.
The host name will be visible when you are using iProntoEdit or when you use your iPronto with the NetX. Make
the iPronto host name as meaningful as possible. You can use a maximum of 64 characters.
You can find more information about the NetX in Using the iPronto Remote Control with the NetX on page 43.
After entering the iPronto host name, you determine the type of IP address you use. An IP address is a number that
identifies you on the Internet. You have two options:
■ Use DHCP (Dynamic Host Configuration Protocol). Your iPronto’s IP address will automatically be assigned by the
DHCP server.
■ Use a fixed IP address. You have only one IP address that you assign to your iPronto and that never changes.
If you use DHCP
1 In the Network Configuration section, select Use DHCP.
The IP address, Subnet mask, Default gateway, Local domain name, DNS1 and DNS2 text boxes are
automatically filled in. You can manually modify the DNS1 and DNS2 text boxes.
Selecting DHCP
iPronto 1.6 IFU En .qxd 22-04-2004 17:23 Pagina 24