Filter
Top Products
11
Connecting Up
Step 4: Connecting the Power
Cord
Connect the power cord to the DVD recorder. After all the
cable connections are completed, you can now plug the
power cord of the recorder into the outlet, and start using
the recorder.
If you use a model which features attached power
cord, you only need to plug the power cord to the
outlet at this step.
..........................................................................................
To have the signal from this DVD recorder shown on
TV, switch TV’s input source to appropriate AV option
(the one connected to this unit). For further informa-
tion on how to change TV’s input source, check the
instruction manual provided by your TV manufacturer.
Connecting to External Devices
Connecting to VCR/V8 Cam-
corder/DVD Player
Connects the AV OUTPUT jack on the camcorder
to the AV INPUT jack on this DVD recorder using a
composite(Audio/Video) cable.
When connecting via the rear-panel INPUT jacks
R
VIDEO
L
Audio/Video Cable
VCR/DVD Player
Camcorder
L
R
VIDEO
OUT
AUDIO
OUT
When connecting via the front-panel INPUT jacks
R
VIDEO
L
L
R
VIDEO
OUT
AUDIO
OUT
Audio/Video Cable
VCR/DVD Player
Camcorder
Connecting to DV (Digital
Camcorder)
Connects the DV-link jack on the DV to the DV-link jack
on this DVD recorder using a IEEE 1394 cable.
Camcoder
DV OUT
DV Link
DV-Link
IEEE 1394
(Not Suplied)
The DV-Link INPUT jack on this recorder is for use
with DV-compatible camcorders only, and not to be
used for connecting any other firewire devices.
..........................................................................................
To have the signal from this DVD recorder shown on
TV, switch TV’s input source to appropriate AV option
(the one connected to this unit). For further informa-
tion on how to change TV’s input source, check the
instruction manual provided by your TV manufacturer.