Filter
Top Products
4646
Checking the
Current Input Signal
• Used to check the
INPUT signal mode,
current time,
resolution, etc.
Press the RECALL Button.
RECALL
• Press the [RECALL] button on the Remote Control.
1
1. If you watch Component, PC, or HDMI:
Displays which input terminal is used, and indicates the input signal mode.
Indicates the mode and current time.
Component
PM 12:00
Indicates the horizontal and vertical resolution of the current input signal
H:1920
V:1080
Component
PM 12:00
H:1920
V:1080
2. If you watch VCR image:
Displays the program number and input terminal, which is used.
Indicates the mode and current time.
AV1
PM 12:00
Displays the video system of input signal
Video PAL B/G
NOTES:
1) “1920 x 1080” displayed in the INPUT signal is not the
resolution of the set, but the signal that is sent by the Digital
Broadcasting Receiver.
- Press the [RECALL] button on the remote control, then displays basic informations of the current input signal,
Under this state, pressing the [RECALL] button once more, additional informations about the current input signal
will be displayed on the OSD.
P.MODE PICTURE FMT AV
S.MODE S.EFFECT PIXEL SHIFT
PIP POSITION COLOR TEMP
PIP SOURCE SWAP RECALL
VOLVOL
MENU
TIMER STILL
R-48F01
MUTE
Checking the Current Input Signal
EN
User Manual BDH4251V/00